Timing pulley
Belt and pulley of our company can be attachment or replacement of imported belt and pulley.
Please supply drawing when you order. We can also draw for clients as their supplied specification, hole, key way and width.
The tolerance of outside diameter, end bounce 7 wrap direction of pulley should conform to Form1, form 2 & form3.
Width of different specification of timing belt and pulley must conform to form4.
Outside diameter of pulleys and size should be as form's regulation.
We can also produce pulleys even sizes are not in the form.
The material of pulley mainly composed of carbon steel, if possible aluminum alloy nylon can also be employed; If external diameter is larger than 250 mm, iron is used.
Features:
The pitch&tooth type of double sided timing belt is same as synchronous belt.
There are two kinds of double sided timing belt:
DA type: Arrangement symmetrical ( see section a)
DB type: Arrangement overlapping ( see section b)
Note: We can produce symmetrical (DA) & overlapping (dB) two kinds double sided timing belt, for particular specification, we can also make according to clients' drawing or sample
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}